0AM DQ200 DSG MECHATRONIC WITH TCU PRE-PROGRAMMED*


Full recon 0AM mechatronic unit with TCU Pre-programmed to your vehicle*


*For programming we require your vehicle's VIN plus the hardware and software numbers. 
*For 0CW models, we require the customers mechtronic unit with TCU to be sent to us first for cloning to new unit.

 

  • Hardware number is located on the TCU (only visible once removed) or via diagnostics equipment.
  • Software number is obtained by using relevant diagnostic equipment.
  • Clutch pistons & breather cap must be used from your original unit.
  • Vehicles with component protection will need this activating once installed on the vehicle.
  • This product does not fit 0CW units.

 

** Mechatronic Oil Required! 1.1L G004000M2 **


This unit will need basic settings and gearbox adaptations.

This product should only be removed, installed and adapted by an experienced technician.

 

This fits all 0AM DQ200 models, Audi, Seat, Skoda, VW.

7 Speed DSG Problems | Mechatronic

 

The 0AM DQ200 DCT mechatronic unit suffers from various faults which cause the driver to experience symptoms like harsh or incorrect gear changes, or even complete loss of drive. This semi-automatic dual clutch gearbox relies on the correct function of the mechatronic to regulate clutch operation as well as gear changing. Faulty DSG mechatronic units can result in damage to the gears and reduced service life of the dual clutch pack.

 

Common symptoms/faults;

 

  • Shaking / juddering in 1st gear and when changing into higher gears.
  • Current gear flashes on dashboard.
  • Flashing engine management light or PRNDS on dashboard.
  • Clutch slip or banging on engagement.
  • Fault code 06293 Function Restriction Due To Pressure Drop
  • P17BF - Hydraulic pump system overload protection.
  • 06079 - Hydraulic Pump, Play Protection
  • 06300 - Function Restriction, Due To Insufficient Pressure Build Up

 

Please note you may experience some, but not all of the listed faults depending on the level of damage internally.

 

TCU Parts Numbers:

  • 0AM927769D / 0AM 927 769 D
  • 0AM927769K / 0AM 927 769 K
  • 0AM927769G / 0AM 927 769 G

 

Mechatronic OEM Number:

  • 0AM325025 / 0AM 325 025
  • 0AM325025D / 0AM 325 025 D
  • 0AM325025H / 0AM 325 025 H
  • 0AM325025J / 0AM 325 025 J
  • 0AM325065 / 0AM 325 065
  • 0AM325065N / 0AM 325 065 N

 

For more information on the DSG 0AM DQ200 mechatronic click here.

If you are experiencing issues selecting reverse then click here.

Fitting service available if required please contact us on: info@eco-torque.co.uk

 

Reference Number: ET2037

 

UK Express Shipping* & International Shipping Next Day Delivery for Europe and USA*, 2-5 days for the rest of the world*.

 

If you are not sure on the compatibility of this part then please send us your UK registration number or VIN Code and we will direct you to the right part!

 

For NON EU Customer/International orders - It is the responsibility of the buyer to pay any custom charges or excise duties.

0AM DQ200 DSG MECHATRONIC WITH TCU PRE-PROGRAMMED*

£795.00Price
TCU Hardware Number
  • If you are not happy with your item, you can return it within 14 days providing the following;

    • The item must be unopened and complete in its original packaging. If the item has been opened Eco Torque reserves the right to refund minus the cost of repackaging the item.
    • Electrical items cannot be return if fitted.
    • Mechatronic units pre-programmed for the customer cannot be returned unless faulty. These items will be tested by Eco Torque upon return.
    • The buyer is responsible for the cost and safe return of their purchased items. Damage in transit will result in a refusal to refund.
  • For full Terms & Conditions please visit www.eco-torque.co.uk/termsandconditions

Eco Torque Gearbox & Clutch Centre

Eco Torque Gearbox & Clutch Centre

Unit 1A Portland Industrial Estate

Hitchin Road

Bedfordshire

Arlesey

SG15 6SG

VAT: 161854696

Hours:

Monday 8:30am - 5:30pm

Tuesday 8:30am - 5:30pm

Wednesday 8:30am - 5:30pm

Thursday 8:30am - 5:30pm

Friday 8:30am - 5:30pm

Saturday Closed

Sunday Closed

Phone: 01462 835335

Email: info@eco-torque.co.uk